|
|
|
|
|
::Breaking news.......We
now offer Quicksilver propellers! Call for pricing! |
 |
ENERTIA
Designed for both outboard- and sterndrive-powered boats, the Enertia
is cast from Mercury’s X7 Alloy. According to Mercury engineers, it’s four times
more durable and 30 percent stronger than conventional stainless steel. The stronger
metal allows for a prop with thinner blades and higher rake angles, which increases
speed and fuel efficiency during acceleration and at top speeds. Mercury says that
using this prop can be equivalent to adding an additional 30 hp. Enertia is available
in 1-inch pitch increments from 14 to 22 inches in standard rotation. And, counter-rotation
models are available in 15-, 17-, 19- and 21-inch pitches to fit many twin- and
triple-engine boats.
|
Price List |
|
BLACK MAX
More than just an aluminum
propeller, the Black Max is the best three-blade aluminum prop available anywhere.
And anywhere is usually where you'll find it. Whenever you need good overall performance,
Black Max is there.
For all 3.3
- 225 HP outboards and Alpha and Bravo One sterndrives with up to 250
hp and a top speed of less that 50 mph
-
High quality die-cast three-blade aluminum
-
Attractive Phantom black finish
-
Durable and easy to maintain and repair
Equipped with Flo-Torq® rubber hub system for the low horsepower outboards and Flo-Torq
II hub system for the high horsepower outboards and stern drives
|
Price List |
|
VENGEANCE
When you're ready to step up
to stainless steel, there's no other prop that delivers all the performance and
value like a Mercury Vengeance. This three-blade propeller offers increased efficiency
and strength over aluminum for a variety of outboards and sterndrives.
-
For 20 - 250 HP outboards and Alpha and Bravo One sterndrives
-
Over five times more durable than aluminum props
-
Better handling and acceleration over most three-blade aluminum props
-
R/H and L/H rotation (9" - 23" pitch)
- Equipped with Flo-Torq rubber hub system for the low
horsepower outboards and Flo-Torq II hub system for the high horsepower outboards
and stern drives
|
Price List |
|
LASER II
If you like to run fast and
light, the Laser II is your propeller. A three-blade stainless steel design providing
amazing bow lift for high horsepower light weight outboard powered 15' - 18' and
sterndrives up to 22'.
-
For outboards 75 hp and up and Alpha Sterndrives 3.0L - 5.7L
-
High-rake design for greater bow lift
-
R/H and L/H rotation (19" - 26" pitch)
- PVS-equipped Equipped with Flo-Torq II hub system
|
Price List |
|
TROPHY PLUS
Looking to increase power
and harness the performance of your bass, flats or sport boat? Trophy Plus is the answer. Its four-blade stainless
steel design provides unbelievable bow lift and quick planning. And it holds better
in tight turns, reduces steering torque so you gain better handling and confidence
on the water.
- For outboards 75 hp and up
Quicker hole shots
-
Small exhaust tube allows increased venting for V-6 outboards (if over-venting occurs
try 878421 seal ring) - -
Improved handling over 3-blade propellers
-
Reduced steering loads
Increased top speed for lightweight bass boats
-
R/H 17" - 28"
- Pitch PVS-equipped Equipped with Flo-Torq II hub system
|
Price List |
|
TEMPEST PLUS
There's speed: then there's the jaw-dropping,
adrenaline pumping speed of the three-blade stainless steel Tempest Plus. Engineered
for high horsepower outboards this prop is ideal for heavy-load situations with
its higher rank and bigger cup allowing for better handling and lift.
- That's why
more bass boat companies require their boats to run with a Tempest Plus.
-
For big, V-6 outboard-powered bass, walleye and bay boats
-
Large 14 5/8" diameter for high motor height installations
- R/H 19" - 29" pitch PVS-equipped
- Equipped with Flo-Torq II hub system
|
Price List |
|
MIRAGE PLUS
Big boats demand big power. And big
power demands the big performance of the Mirage Plus propeller. Its large diameter
and patented high-output blade geometry moves larger boats with little effort. From
houseboats to race boats, this stainless steel, three-blade prop is ideal. In fact,
more offshore boat manufactures run their boats with a Mirage Plus propeller.
-
For outboards over 150 hp, especially offshore fishing and sport boats.
-
For V-8 single or dual Bravo One and TRS sterndrives
- Available with 1 ¼" hub kit for Bravo XZ and XR sterndrives
-
R/H and L/H rotation (13"- 29" pitch)
- Equipped with Flo-Torq II hub system
|
Price List |
|
ALPHA 4
If you're in the market for high-quality
performance and acceleration, but in a lower price range, the Alpha 4 propeller
is what you're looking for. This four-blade aluminum prop, with its durable high-gloss
phantom black finish, is the perfect choice for runabouts, ski boats, and day cruisers.
-
Offering improved handling and better holding than a three-blade prop.
- R/H and L/H rotation for V-6 outboards and
- 3.0L - 5.7L Alpha sterndrives
20" Alpha 4 replaces 21" three-blade prop
18" Alpha 4 replaces 19" three-blade prop
16" Alpha 4 replaces 17" three-blade prop
- Equipped with Flo-Torq II hub system
|
Price List |
|
VENSURA (OFFSHORE SERIES)
Need a great four-blade propeller?
The Mercury four-blade, stainless steel Vensura props deliver. Better acceleration,
aggressive holding offers great performance with light weight 18' - 24' center consoles,
ski boats or runabouts. When a three-blade just won't cut it, this prop is what
you need.
-
For single 135 - 175 hp outboards - aluminum multispecies fishing boats
-
For 3.0L - 5.7L Alpha sterndrive runabouts
For V-6 outboard or 3.0L - 5.7L Alpha water ski boats
- For twin offshore 135 - 175 hp outboards
- R/H and L/H rotation (17" - 23" pitch)
- PVS-equipped Equipped with Flo-Torq II hub system
|
Price List |
|
REVOLUTION 4
Power, speed and lift. With
a Rev 4 strapped on to your V-6 outboard or sterndrive powered boat, that's exactly
what you get. Its four large blade stainless steel design brings incredible traction,
mind-blowing acceleration with amazing holding and top speed. Open up the throttle
and go… fast.
-
For single or dual heavy offshore V-6 outboards, Alpha, Bravo One and TRS sterndrives
-
The Revolution 4 offers more bite than the Vensura
-
Moving from a Mirage Plus to the same pitch Revolution 4, engine RPM can drop 200
- 300 RPM
-
Improved planing and midrange cruising speed
-
R/H and L/H rotation (17"- 23" pitch)
- PVS-equipped Equipped with Flo-Torq II hub system
|
Price List |
|
BRAVO I
Cances are if you have a huge-horsepower,
high-performance boat, there's a Mercury Bravo I propeller driving it. That's because
nothing else delivers like the four-blade stainless steel design of the Bravo I.
Adding increased speed; better acceleration; and amazing, overall top-end performance;
this prop leaves all others in its wake. And that is why more boat companies strap
the Bravo I on their boats.
-
For high-horsepower, high drive height single, dual or triple outboard and sterndrive
applications
-
Excellent speed and handling for stepped hulls and cats
- Available with 1 ¼" hub kit for Bravo XZ & XR sterndrives
-
R/H and L/H rotation (22" - 36" pitch)
- Equipped with Flo-Torq II hub system
|
Price List |
|
MAXIMUS
Take the lead with the new
Mercury MAXIMUS. The five-blade performance propeller for high-horsepowered MerCruiser
and Mercury Racing XZ/XR Bravo One Sterndrives. Limited pitch range available starting
summer 2003.
- For high-horsepower, high drive height outboards and sterndrives
-
Excellent planning and top speeds for heavy, vee-bottom hulls
-
R/H and L/H rotation (26"-36" pitch)
-
PVS (Performance Vent System)
-
Great for stepped hulls with high "X" dimension
- Equipped with Flo-Torq II hub system
|
Price List |
|
HIGHFIVE
Whether you're pulling skiers
or hauling it to your favorite fishing hole, the HighFive propeller unleashes the
ultimate in hole shot. Its five-blade stainless steel design pulls strong and smooth,
even in rough water. Plus, it offers great bow lift and handling. That's why more
weekend boaters and water-skiers demand the power of the HighFive.
-
For 75 - 125 hp outboards (20" - 24" pitch)
- For 135 - 225 hp outboards and Alpha, Bravo One
and TRS sterndrives (17" - 25" pitch)
-
Smooth acceleration and effortless pulling power PVS-equipped
- Equipped with Flo-Torq II hub system |
Price List |
|
BRAVO II
Three & Four Blade
When you need enhanced mid-to
top-range performance, the three-blade and four-blade Bravo Two propellers step
up to the plate. A large blade area provides maximum thrust and their beefy design
gives you better maneuverability and excellent holding in turns.
- Three-blade prop available in aluminum or stainless steel
- Four-blade prop available in stainless steel
- R/H and L/H rotation
-
Three-blade (11" - 25" pitch)
- Four-blade (18" - 22" pitch)
- Equipped with Flo-Torq rubber hub system
|
Price List |
|
BRAVO III
For unbelievable control and handling
in a twin prop, we offer the Bravo Three. With its large-diameter forward propeller
and small-diameter aft propeller, the Bravo Three generates high thrust production
and improved operating efficiency - all while running smoothly at both high - and
low-end speeds.
-
Twin contra-rotating stainless steel propellers " 20" - 30" pitch
-
Available in standard or light cup versions
-
Equipped with stainless steel spline hub system
|
Price List |
|